Pachube

Remote Control Arduino Ethernet via web page (using Pachube)

See notes below and the community.pachube tutorial for more info + Arduino code, or just download the Arduino/Pachube controller code here.

1. Controller feed url:
Enter your feed number, http://www.pachube.com/feeds/     and then click: (you may need to sign in to Pachube)

2. Set pins:

Digital outputs (tick to switch on):

  • digital out 0
  • digital out 1
  • digital out 2
  • digital out 3
  • digital out 4
  • digital out 5
  • digital out 6
  • digital out 7
  • digital out 8
  • digital out 9
note: pins 10, 11, 12 & 13 used by the ethernet shield.

Analog outputs (0 - 255):

  • PWM out 3
  • PWM out 5
  • PWM out 6
  • PWM out 9
note: non-zero values override digital out settings.

Debugging info appears here:

notes: